Building the Stinson SR-9 (16)

This is another of those places where it all starts to get really interesting. The basic structure of the airplane is complete, and that goes a long way toward defining just what sort of model airplane it’s going to be. If we haven’t built in plenty of accuracy, strength and lightness by now, it’s never […]

Continue reading

Building the Stinson SR-9 (15)

“You’re gonna put working cabin doors on that new  scale job you’re building? And, you’re planning on taking it out and flying it…and flying regularly, not just once to prove you dared to? Yeah, right…” Once upon a time, admitting to something like this would instantly assign you to the ranks of those gawky, nerdly […]

Continue reading

Building the Stinson SR-9 (14)

Now it’s time to close up the bottom of the fuselage with sheet balsa. This part of the building sequence offers me a fine opportunity to talk about one of the choices of design and construction technique that went into developing this kit. This is something that goes back to the very earliest days of […]

Continue reading

Building the Stinson SR-9 (13)

The last time we got together here to work on this airplane I finished up the session by giving the motor mounting box a reinforcing layer of 2-ounce fiberglass cloth bonded with a wet coat of thinned epoxy. We’ll have a close look at the finished mount soon enough, but right now (while that epoxy is REALLY curing) […]

Continue reading

Building the Stinson SR-9 (12)

Sorry…it’s been a while since I added anything to this story. Let’s just say that life has been really generous in providing me with things to do that don’t include model airplanes. However…there are LOTS of neat things going on in my shop, among them slow but steady progress on this Stinson SR-9. Let’s get back […]

Continue reading

Building the Stinson SR-9 (11)

During the last construction session I assembled formers F-3 through F-8 and built up the basic box structure that forms the bottom of the fuselage. During that entire assembly sequence the fuselage assembly was fastened to the building board with plenty of heavy-duty pins. When the last of the bottom stringers was in place I […]

Continue reading

Building the Stinson SR-9 (10)

In order to provide the most useful evaluation of this kit for those of you who are reading this, I’m following the construction steps in exactly the order they are presented in the instruction manual. The book says, build the tail surfaces first, then the wing panels and finally the fuselage, so that’s exactly what […]

Continue reading

Building the Stinson SR-9 (9)

It’s been a while since I have done any work that counts on this airplane…in fact, I have to confess that I’ve been letting it gather dust in my shop for about a year.  I set the Stinson aside to work on the old FlyLine Great Lakes Trainer kit. That project turned into a twenty-nine-installment […]

Continue reading

Building the Stinson SR-9 (8)

The next step is the addition of the leading edge sheeting and the capstrips to the wing structure. All of the assembly up to this point has been done with the wing flat on the building board, kept in alignment by various built-in jigs and spacers and held in place by those big lead building […]

Continue reading

Building the Stinson SR-9 (7)

OK…now it’s time to get started on something that will make it clear just how BIG this model really is…let’s build the wing. As it turns out, even if my workbench were long enough to lay out both the right and left panels of the wing at the same time, I would have to walk […]

Continue reading