“A scale WWII twin-engined fighter is supposed to have wheels…landing gear!” That was pretty much my first response when FLY RC asked me to consider doing a kit review of Sig’s DO 217. As presented, the kit doesn’t include any at all, although the instructions do mention an optional fixed landing gear. “No way…it deserves […]
This time I’m working on something different. You may have seen ads for Sig’s little twin electric Dornier DO 217 (German WWII night fighter) kit…I’d noticed them but hadn’t paid much attention. Part of my problem with their product offering was that the kit is advertised as a hand-launch/belly-land model, and to me a setup […]
This one was worth waiting for. A couple of weeks ago my good friend Gary Ritchie, who does all the flight photography you see here, called me and suggested that the weather was about as good as it would ever get at this time of year and did I want to go flying? As it […]
It’s finished…done…ready to fly. As a matter of fact. the airplane has been flown successfully, but getting me, my photographer friend, and good weather together at the same time has been a problem so you’ll have to take my word for that part for a while. There were a couple of final details that needed […]
All that’s left before flight testing is rigging. In this case that means both rigging the functional controls…hooking the servos to the surfaces…and making up the wing and tail brace wire groups. Let’s look at the servos first. I used Sullivan Gold-N-Rod splined nylon flexible concentric tube connectors (S-504) for the connections between the rudder […]
There are a few more construction tasks left before this airplane is ready for her first trip outside the shop. They may be small, but they will attract the attention of anyone who looks at the model. I’m going to finish the cockpit by adding the windshield glazing, some coaming and padding, and a dummy […]
It’s time to put some paint on this airplane. If this were going to be a competitive model I would already have gathered whatever color references were available, most likely photos or published artwork, determined exactly which paint products I would need to get the most accurate possible reproduction of the colors on the full […]
You may have noticed that up until now I have paid no attention at all to one of the most obvious “scale details” on the airplane…the windshields of the twin open cockpits. All too often open cockpit model windshields take the form of a chunk of clear plastic stuck to the top of the fuselage […]
With the model covered, clear doped and primed, just about ready for color, there are a few more details I need to take care of before that final paint job can begin. The one I want to tell you about this time provides a perfect example of the way building scale model airplanes is in […]
Whether we call it “silk-and-dope”, “dope and tissue”, “polyspan and nitrate”, or whatever, covering and finishing model airplanes using a sheet of paper or fabric and then sealing it with various paint products involves two different operations. We have just finished the first, which is cutting, attaching and shrinking the covering material (in this case, […]