The last time we got together here to work on this airplane I finished up the session by giving the motor mounting box a reinforcing layer of 2-ounce fiberglass cloth bonded with a wet coat of thinned epoxy. We’ll have a close look at the finished mount soon enough, but right now (while that epoxy is REALLY curing) […]
Sorry…it’s been a while since I added anything to this story. Let’s just say that life has been really generous in providing me with things to do that don’t include model airplanes. However…there are LOTS of neat things going on in my shop, among them slow but steady progress on this Stinson SR-9. Let’s get back […]
During the last construction session I assembled formers F-3 through F-8 and built up the basic box structure that forms the bottom of the fuselage. During that entire assembly sequence the fuselage assembly was fastened to the building board with plenty of heavy-duty pins. When the last of the bottom stringers was in place I […]
In order to provide the most useful evaluation of this kit for those of you who are reading this, I’m following the construction steps in exactly the order they are presented in the instruction manual. The book says, build the tail surfaces first, then the wing panels and finally the fuselage, so that’s exactly what […]
It’s been a while since I have done any work that counts on this airplane…in fact, I have to confess that I’ve been letting it gather dust in my shop for about a year. I set the Stinson aside to work on the old FlyLine Great Lakes Trainer kit. That project turned into a twenty-nine-installment […]
This one was worth waiting for. A couple of weeks ago my good friend Gary Ritchie, who does all the flight photography you see here, called me and suggested that the weather was about as good as it would ever get at this time of year and did I want to go flying? As it […]
Not long after I finished the design work with the TigerKitten and got the airplane to the point where I was satisfied that I had it right, I developed a larger version. Originally this design was called the TigerCat, and was published as a design feature article in Model Aviation Magazine (January, 1993). A few […]
All that’s left before flight testing is rigging. In this case that means both rigging the functional controls…hooking the servos to the surfaces…and making up the wing and tail brace wire groups. Let’s look at the servos first. I used Sullivan Gold-N-Rod splined nylon flexible concentric tube connectors (S-504) for the connections between the rudder […]
(NOTE: This is the revised introduction I added to this blog entry after it was used as the source of the FLY RC Magazine article based on my original blog content.) A while back I presented a two part article here in Fly RC explaining how I scaled out the big (1/6 scale) WACO SRE ARF from Sig. […]
There are a few more construction tasks left before this airplane is ready for her first trip outside the shop. They may be small, but they will attract the attention of anyone who looks at the model. I’m going to finish the cockpit by adding the windshield glazing, some coaming and padding, and a dummy […]