Building the (Old) FLYLINE Great Lakes 2T-1A Kit (16)
On the FlyLine kit plan, the landing gear is shown as several poorly defined struts made up from brass strip and aluminum tube as well as a main and rear strut of 3/32″ steel wire. The main wire strut includes the axles, and if carefully assembled by wire-wrap-and-solder with the rear strut, MIGHT pass for...Continue reading→
Building the (Old) FLYLINE Great Lakes 2T-1A Kit (15)
Locking up the mounting of the upper wing on the cabane strut assembly established the angle of incidence (2 degrees positive). With that done, I’ll be able to build and fit the interplane (“N”) struts to match that angle. The first big decision is how I am going to attach the struts to both the...Continue reading→
Building the (Old) FLYLINE Great Lakes 2T-1A Kit (14)
Biplanes have struts (most of them do, anyway), and the Great Lakes offers plenty of opportunity to learn how to build them. There are no bracing struts on the tail assembly, but we have a whole collection of them in the landing gear assembly, the usual interplane (outboard) struts, and the cabane struts (which hold...Continue reading→
Building the (Old) FLYLINE Great Lakes 2T-1A Kit (13)
If you go back and look at the first entry in my series on this airplane, you’ll see that the plans describe building the fixed horizontal tail (stabilizer) as a single piece to be glued in place as part of the tail assermbly, with the intention that the covering of the stabilizer and that of...Continue reading→
Model Mystery Solved
Well, it cost me over a month of not-so-patiently waiting, but now I can tell you that the little Ercoupe FLIES. Getting it to that point turned out not to be quite as easy as I expected when I posted my last entry on that model on March 10. It turns out that I have...Continue reading→
Building the (Old) FLYLINE Great Lakes 2T-1A Kit (12)
The next step in building the fuselage is the addition of all the stringers, which are those narrow strips running nose-to-tail with the primary function of creating a more or less rounded cross section. Stringers differ from longerons, which are primary structural members. On this airplane there are stringers on the top, bottom and both...Continue reading→
Let’s Go Flying (It’s About Time!)
From what I have heard, just about all of us have been having less than ideal flying weather recently. Here in the Pacific Northwest we don’t get much snow, and it seldom freezes, but we have more than enough gray, rainy windy weather to share with the rest of the world. Just last Saturday, (the...Continue reading→
Building the (Old) FLYLINE Great Lakes 2T-1A Kit (11)
As with a lot of older kits, there isn’t a lot of specific detail on the drawings to show you how the lower wing and landing gear are supposed to be attached to the rest of the fuselage. (The same goes for the upper wing and cabane struts, too, but we’ll talk about that later.)...Continue reading→