Going All-Out With A Classic Balsa B-17-F – Part 17 It has been a while since we did any work on the B-17. Several months ago I hinted that there might be some changes in the works, and left it at that. In fact I have been busier than you want to know with some […]
Restoring A Classic PT-19 (Model) Airplane – Part 4 JULY 17, 2016… A NOTE TO ALL MY READERS: As you may have noticed I have not been posting material as often as in the past. Over the past year my wife and I have been involved 24/7 as the only caregivers for an elderly family […]
Restoring a Classic PT-19 (Model) Airplane – Part 3 We left off last time with plenty of work to do on the tail surfaces…let’s get going on that. PT-19-54 I made a pattern, then traced and cut out four identical 1/64” plywood skins. PT-19-55 Here’s one of them all ready to attach. […]
Restoring A Classic PT-19 (Model) Airplane – Part 2 Last time I shared the story of how I got this PT-19 model and chose to do this restoration project, and we made a good start looking at things that were wrong with it (and needed to be fixed). This time we’ll get in to some […]
Restoring A Classic PT-19 (Model) Airplane – Part 1 A note to my readers: You were expecting to see the next installment of the B-17 project here. Don’t worry, that model is alive and well in my shop but I elected to take it “out of the spotlight” for a while to concentrate on getting […]
Going All-Out With A Classic Balsa B-17-F – Part 16 This is going to be my last session working on the B-17 fuselage for a while. There is a lot of work on the wing left to be done to get it up to the same level of completion. You have probably already figured out […]
Going All-Out With A Classic Balsa B-17-F – Part 15 This session is going to be about the first of a series of steps that have got to come before I can think about doing any “fine detailing” on the fuselage, let alone get into “finishing” (a paint job). Just as with the wing, along […]
Going All-Out With A Classic Balsa B-17-F – Part 14 I finished the last work session on the B-17 fuselage by sharing my decision on the best way to go about sheeting/skinning the framework. Just so you know, what we’re doing does not qualify as “planking”…that’s a somewhat different process based on using lots of […]
Going All-Out With A Classic Balsa B-17-F – Part 13 Now that I have a fully framed -up fuselage assembled to the stage that I can actually set it in place against the wing, the logical next step might be to get to work “finishing” it by starting the process of balsa sheet planking/skinning. But… […]
Going All-Out With A Classic Balsa B-17-F – Part 12 Do you like it when all the separated parts of a project finally begin to come together? I certainly do, and…for me anyway… that’s what starting work on the fuselage of a new model airplane is all about. As you’ve already figured out, I nearly […]