Last time I showed you a pair of simulated-but-real-looking landing lights. Do you remember my discussion at the beginning of that installment about the ever-present need to weight the value of added detail against the value of the weight savings that doing without them offers? Those landing lights are a good example…I chose to include […]
“A scale WWII twin-engined fighter is supposed to have wheels…landing gear!” That was pretty much my first response when FLY RC asked me to consider doing a kit review of Sig’s DO 217. As presented, the kit doesn’t include any at all, although the instructions do mention an optional fixed landing gear. “No way…it deserves […]
This time I’m working on something different. You may have seen ads for Sig’s little twin electric Dornier DO 217 (German WWII night fighter) kit…I’d noticed them but hadn’t paid much attention. Part of my problem with their product offering was that the kit is advertised as a hand-launch/belly-land model, and to me a setup […]
This is another of those places where it all starts to get really interesting. The basic structure of the airplane is complete, and that goes a long way toward defining just what sort of model airplane it’s going to be. If we haven’t built in plenty of accuracy, strength and lightness by now, it’s never […]
“You’re gonna put working cabin doors on that new scale job you’re building? And, you’re planning on taking it out and flying it…and flying regularly, not just once to prove you dared to? Yeah, right…” Once upon a time, admitting to something like this would instantly assign you to the ranks of those gawky, nerdly […]
Now it’s time to close up the bottom of the fuselage with sheet balsa. This part of the building sequence offers me a fine opportunity to talk about one of the choices of design and construction technique that went into developing this kit. This is something that goes back to the very earliest days of […]
The last time we got together here to work on this airplane I finished up the session by giving the motor mounting box a reinforcing layer of 2-ounce fiberglass cloth bonded with a wet coat of thinned epoxy. We’ll have a close look at the finished mount soon enough, but right now (while that epoxy is REALLY curing) […]
Sorry…it’s been a while since I added anything to this story. Let’s just say that life has been really generous in providing me with things to do that don’t include model airplanes. However…there are LOTS of neat things going on in my shop, among them slow but steady progress on this Stinson SR-9. Let’s get back […]
During the last construction session I assembled formers F-3 through F-8 and built up the basic box structure that forms the bottom of the fuselage. During that entire assembly sequence the fuselage assembly was fastened to the building board with plenty of heavy-duty pins. When the last of the bottom stringers was in place I […]
In order to provide the most useful evaluation of this kit for those of you who are reading this, I’m following the construction steps in exactly the order they are presented in the instruction manual. The book says, build the tail surfaces first, then the wing panels and finally the fuselage, so that’s exactly what […]